Motherboard (Aura/Mystic Light) RGB to Corsair Fan cable for most Corsair RGB Fans (LL, HD, ML, SP-PRO, QL)
Want to control your Corsair RGB Fans with your motherboard's Addressable RGB connector? Or how about with Razer's Chroma Hub, EK-Loop Connect, or any of the other controllers out there with a motherboard-style connector?
Then this is the adapter that you are looking for! This adapter connects your motherboard's 3-pin, addressable RGB connector to a Corsair 4-pin (Fan) connector, allowing you to connect most Corsair RGB fans to your controller.
The result? You can now control your Corsair RGB devices with Asus Aura, MSI Mystic Light, Razer Synapse, and many other RGB apps out there!
Before clicking "Buy Now", there are a few things that you need to consider.
1) This adapter only works with 3-pin 5V Addressable RGB connectors. It does not work with 4-pin 12V analog RGB connectors.
Your motherboard must have the correct connector (ADD_HEADER on Asus, JRAINBOW on MSI, D_LED on Gigabyte); make sure that you check your
motherboard's manual before purchasing. This will work with all Asus, MSI, and AsRock motherboards with the addressable header and most
Gigabyte motherboards (post z370 series). The connector should have 4 positions and 3 pins.
2) Corsair SP-RGB fans cannot be controlled from the motherboard. They use a different protocol from the rest of the RGB LED fans and strips.
This only applies to the older, original SP-RGB fans; the newer SP-PRO RGB fans can be controlled from the motherboard.
Contact us if you have questions about compatability!
3) Do not attempt to plug this into a 12V, 4-pin connection. Doing so and connecting to Corsair RGB items may damage the LEDs on the Corsair
device (the magic blue smoke escapes, rendering the LEDs dead). Note that this adapter does have one pin blocked to mitigate this issue.
Yes, this was already mentioned in item #1 above … it's that important!